PICTURE FROM CATERS (PICTURED - The rocket carrying the Falcon) An experimental unmanned aircraft that can fly at 20 times the speed of sound is to undergo a crucial test flight on today (Thursday). The Falcon HTV-2 will be launched on a rocket into space then will glide back down to Earth at speeds of 13,000mph. The previous test flight lasted only nine minutes before being deliberately crashed as a safety measure due to technical difficulties.

Chinese scientists have developed a new heat-resistant material for hypersonic aircraft which can endure over 3,000 C from friction caused by a Mach 5-20 flight within the atmosphere.

The lead scientist on the project said the material outperforms all similar foreign-made ones with its high melting point, low density and high malleability.

The new material enables a hypersonic aircraft to fly at Mach 5-20 within the atmosphere for several hours, as the high heat resulting from the friction between the aircraft and the air reaches between 2,000 C to 3,000 C, a temperature normal metal would not be able to endure.

Normal metals melt at around 1,500 C, but this new material can bear over 3,000 C for an extended period, state-owned Hunan Television reported recently.

Unlike foreign technologies that use traditional refractory metals and carbon-carbon materials, the China-made new material is a composite of ceramics and refractory metals, Fan Jinglian, the lead scientist who developed the material and a professor at Central South University in Central China’s Hunan Province, told the Global Times.

The combination of ceramics and refractory metals makes the material far more efficient than foreign-made ones, and this technology is world-leading, Fan said.

In a simple analogy, Fan likened her composite to concrete cobble. “Think of the ceramics as the cobblestones, or the pellets, and the refractory metals are like the concrete. In high temperatures, the ceramics will act as pellets that pin the refractory metals, so they will not soften and deform.”

As a result, the material not only has a high melting point, but also valuable characteristics such as low density and high malleability, according to the Hunan Television report.

ALSO READ  Russian Army gets first new T-90M tank

China launched a major hypersonic aircraft project in 2009, and most Chinese scientists considered using carbon-carbon materials instead of metals back then.

Fan was questioned for her proposal to use such a material, but she insisted on making a sample, which came into being in 2012 and showed great potential.

As of March, the material has been used for products in a variety of fields including aviation, space exploration, shipbuilding and national defense, Hunan Television reported.

Hypersonic aircraft is not the only area in which materials made of ceramics and refractory metals can shine, Fan said. Any field that involves extreme high temperature, such as engines, space rockets and nuclear reactors, will have a great demand for the material, Fan noted.

China launched the Xingkong-2 waverider hypersonic flight vehicle via a rocket in a target range located in Northwest China in August 2018.

On Tuesday, East China’s Xiamen University launched the Jiageng-1 hypersonic aircraft with a double-waverider design.

The test was part of the university’s project to try to quintuple the current speed of civil aircraft to achieve global direct access within two hours, the Xinhua News Agency reported on Tuesday.

It is unknown whether Fan’s material was used in these two cases.

 

Source: Global Times

Advertisements
Share this article:
  •  
  •  
  • 4
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
    4
    Shares

Notice: All comments represent the view of the commenter and not necessarily the views of AMN.

All comments that are not spam or wholly inappropriate are approved, we do not sort out opinions or points of view that are different from ours.

This is a Civilized Place for Public Discussion

Please treat this discussion with the same respect you would a public park. We, too, are a shared community resource — a place to share skills, knowledge and interests through ongoing conversation.

These are not hard and fast rules, merely guidelines to aid the human judgment of our community and keep this a clean and well-lighted place for civilized public discourse.

Improve the Discussion

Help us make this a great place for discussion by always working to improve the discussion in some way, however small. If you are not sure your post adds to the conversation, think over what you want to say and try again later.

The topics discussed here matter to us, and we want you to act as if they matter to you, too. Be respectful of the topics and the people discussing them, even if you disagree with some of what is being said.

Be Agreeable, Even When You Disagree

You may wish to respond to something by disagreeing with it. That’s fine. But remember to criticize ideas, not people. Please avoid:

  • Name-calling
  • Ad hominem attacks
  • Responding to a post’s tone instead of its actual content
  • Knee-jerk contradiction

Instead, provide reasoned counter-arguments that improve the conversation.

newest oldest most voted
Notify of
Daeshbags-Sux
Guest
Daeshbags-Sux

The problem for hypersonic civilian flights is not so the material, BTW, there are already well known 3000°C+ ones for decades…
The problem is ALWAYS the same : cost effectiveness.
Just think about it : with inflation, at the present day, a Paris/New-York Concorde ticket would cost about €20-23k… And in fact, both Air-France and BAe were losing money on it : Concorde was a prestige asset, just like Haute-Couture is advertising for prêt-à-porter.
If just going Mach2 was as cost effective as being high subsonic, all airlines would be supersonic for 40-50 years now.

Member
Regular
Upvoted
Commenter
Alicia Keez

Yeah that may be so but as we all know things made in China are cheaper.